Y0260

• Two special drying ovens for honeycomb panels before machining. They are installed in a workshop of a major French manufacturer of honeycomb panels. The honeycomb panels are used as the structural core of composite parts for the aerospace industry.  
   
• The layers of carbon fiber composite material are laminated on either side of the honeycomb to form a sandwich structure. This increases the rigidity and strength of the parts while maintaining minimal weight.  
   
• To guarantee dimensional tolerances, the raw honeycomb panels must be completely free of moisture before machining. They remain in the first oven for at least 24 hours. The machined parts are stored in the second oven to prevent them from absorbing moisture until they are used.

Oven specifications 1 (6.4 m²)

• Maximum operating temperature: 100 °C
• Internal dimensions in mm (W x D x H): 1500 x 2850 x 1500
• Power supply: 400V ~3P 50Hz 16A
• Heating power: 6,000 Watts to maintain 100°C in this volume
• Optimized insulation: 120 mm of glass wool
• Chamber material: 430 stainless steel
• Located in a cleanroom

Oven specifications 2 (10.5 m²)

• Maximum operating temperature: 100 °C
• Internal dimensions in mm (W x D x H): 2000 x 3500 x 1500
• Power supply: 400V ~3P 50Hz 25A
• Heating power: 12,000 Watts to maintain 100°C in this volume
• Optimized insulation: 120 mm of glass wool
• Chamber material: 430 stainless steel
• Located in a cleanroom