J693 - France Etuves

Two ovens designed for cross-linking of plastic rollers placed in cages between 90°C and 120°C.

Working volume: 31,25 m³
Internal dimensions WxDxH: 2500x5000x2500 mm
Total installed capacity: 30 kVA
Mini / maxi temperature: 60°C / 150°C

A 31 m³ XXL oven The ovens are monobloc and have no floor. The loading of products on trolleys is directly on the floor of the premises in which the ovens are installed. Guide rails and limit stops allows you to insert easily the trolleys and to not damage the oven. Transport girders, fastenings for handling jacks and angles had been fixed on the ovens to make easier their installation. These elements are removable once the ovens are installed. The fan engines of the ovens that must be disassembled for transport and their passage in the premises of the customer have handling sheaths to make easier their installation and their replacement in case of maintenance. Pressure switches for airflow check that it is sufficient. Each oven has an ?? 60 mm access port with cork centered on each lateral side. The doors are equipped with an inner handle allowing an operator accidently shut up inside to free himself. Each oven has four inner lighting points that automatically light when the door is open. Temperature control and the air change setting on each step of the program are ensured by a Nanodac controller-profiler-recorder. Programs may be launched with a delay start. Steam heating Heating is ensured by a battery located in the air flow of the oven and supplied by steam (9,5 bars). The heating circuit with control and safety valves that are supplied by compressed air (5 to 8 bars) so that they open / close. These valves are equipped with servomotors controlled by the temperature controller to control steam flow sent to the battery and ensure the safety. The heating circuit is protected by protective sheets. Heating is cut off at each time the door is open. At each heating cut off due to overheating or door???s opening, you must push a push-button to reset heating.