Various applications:

Polymerisation of paint films, of solvent-free glue, of pre-impregnated (Prepeg)...
Reheating of flavours, drums heating...
Curing of moulds, of tools, of tubes...
Drying of primers on glass, of compact powder, of resin, of ilament wiring tubes in rotation, of aluminium parts...
Pre-heating of metallic parts...
Burn-in of electronic components...
Warm-up of stainless steel parts...
Stabilisation of elastomer products...

--> -->

Powerful. Efficient. Reliable.

A more robust construction. More powerful for a rapid rise in temperature. A stronger air flow. A more important air renewal to vent clearances. More homogeneous.

Industrial ovens XL are perfectly suitable for drying applications but also for: curing, varnish curing, decontamination, degassing, debinding, dehumidification, dehydration, dessication, stress relief heat treatment, burn-in, removal of varnish, hardening, thermal tests, liquefaction, soaking, malleabilization, polymerization, post-curing, after-cure, preheating, reheating, annealing, tempering, crosslink, stabilization, sterilization, thermal storage, thermoforming, ageing… Temperature : up to

200°C / 300°C

(option) 8 volumes : 112, 343, 490, 686, 980, 1000, 1400, 1800 liters.

A strong construction for lasting performance.

The outer casing is made of steel plate, finished in a tough stoved epoxy paint (white and blue colors). The inner casing is made of corrosion resistant stainless steel, bright polished. ENTRY PORT Ø 20 mm An entry port Ø 20 mm is centered on the left side for passing cables or probes. A silicone cork allows you to block the access port in case of non-use or to make airtight after passing cables.

An incredible heating power.

The rise in temperature is very fast. Heating is ensured by sheathed stainless steel heating elements, ideally positioned in the air flow and controlled by SSRs. A BETTER INSULATION No contact between inner and outer casing. The thick insulation, asbestos-free, allow : excellent thermal stability, low heat dissipation, reduced energy costs, low surface temperatures.

A powerful vertical airflow which accelerates the drying process.

The air is sucked upwards through the fan (protected by a stainless steel sheet). Air passes over the temperature sensor and the heating elements. The heated air is distributed in the bottom of the oven through the whole width and then re-circulated by the fan. An adjustable fan speed device can be installed as an option.

An amazing temperature homogeneity !

The powerful air flow increases the homogeneity of the temperature inside the volume.

A wonderful air change

63, 80 or 100mm diameter (depending on the model) new air inlet and hot air outlet are located on the top of the oven. Their opening is adjustable in order to control the air change rate. The air exhaust chimney is directly connectable to an extraction system

The C3030 temperature profiler

The FRANCE-ETUVES C3030 temperature controller is very accurate and particularly reliable. Measurement by PT100 or TCJ probe. Electronic PID temperature controller. Accuracy: 0.1°C. Color display, excellent visibility of temperatures. Functions : display of setpoint and measured temperature display (in percentage) of the heating power used date and time display Possibility of making 1 program with 8 steps: 4 programmable temperature ramps (°C/min) and 4 heating timer (max 9999min) delayed start repeat loop monitoring of your current program (step and remaining time) pause or stop the program end of cycle buzzer PID adjustment possibility of adding a temperature correction at 2 distinct temperatures (offsets) RS485 modbus multipoint communication: allows to control several ovens on the same network

Protections for your oven and your products.

An ajustable electronic thermostat (class 3.1 protection) protects your products. It measures the temperature in the volume, and supports the regulation in case of failure of the temperature controller. It stops heating until the temperature has dropped below the value of its setting. A mechanical thermostat with reset button (class 1 protection) protects the oven. It checks if the temperature rises unusually. Heating is then cut. In case of failure of the ventilation fan, the heating is stopped. Different visual alarms.

Loading shelves

XL industrial ovens are delivered with 2 shelves (metal grills). Many positions are available for convenient loading/unloading. Each shelf can withstand up to 30 kg. Supports of shelves have an anti-tilting system. Additional shelves that can withstand up to 60 kg are available as accessories.

Applications for each industry:

Composites curing
Coating
Polymerization
Drying applications
Preheating, heating
Curing
Burn-in, Warm-up
Stabilisation

On the left, composite structural beam to fasten the wings on the body of the latest A380 AIRBUS.

Polymerization of helicopter's blades for a famous european manufacturer.

Industrial oven 112 liters XL0112

Model	XL0112
Chamber volume:	112 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	112 litres
Interior Dimensions (L x P x H) :	500 x 450 x 500 mm
Exterior Dimensions (L x P x H) :	751 x 942 x 1152 mm

Partials product models shleves
Shelves quantity :	2 delivered / 8 maximum
Shelves dimensions :	470 x 420 mm
Max Load per Shelf / Total :	30 / 100 kg

Power & Divers :
Electrical Supply :	230V ~1P 50Hz 16A
Standard power 200 °C :	3000 Watts
Number of door(s) :	1
Ventilation flow rate :	1100 m3/hour
Weight :	136 kg

Industrial oven 343 liters XL0343

Model	XL0343
Chamber volume:	343 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	343 litres
Interior Dimensions (L x P x H) :	700 x 700 x 700 mm
Exterior Dimensions (L x P x H) :	961 x 1192 x 1533 mm

Partials product models shleves
Shelves quantity :	2 delivered / 11 maximum
Shelves dimensions :	670 x 670 mm
Max Load per Shelf / Total :	30 / 180 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 50Hz 16A
Standard power 200 °C :	6000 Watts
Number of door(s) :	1
Ventilation flow rate :	1400 m3/hour
Weight :	198 kg

Industrial oven 490 liters XL0490

Model	XL0490
Chamber volume:	490 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	490 litres
Interior Dimensions (L x P x H) :	700 x 700 x 1000 mm
Exterior Dimensions (L x P x H) :	961 x 1191 x 1653 mm

Partials product models shleves
Shelves quantity :	2 delivered / 17 maximum
Shelves dimensions :	670 x 670 mm
Max Load per Shelf / Total :	30 / 180 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 20A
Standard power 200 °C :	6000 Watts
Number of door(s) :	1
Ventilation flow rate :	1400 m3/hour
Weight :	218 kg

Industrial oven 686 liters XL0686

Model	XL0686
Chamber volume:	686 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	686 litres
Interior Dimensions (L x P x H) :	700 x 700 x 1400 mm
Exterior Dimensions (L x P x H) :	1181 x 1221 x 2023 mm

Partials product models shleves
Shelves quantity :	2 delivered / 24 maximum
Shelves dimensions :	670 x 670 mm
Max Load per Shelf / Total :	30 / 200 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 50 Hz 16A
Standard power 200 °C :	9000 Watts
Number of door(s) :	1
Ventilation flow rate :	1400 m3/hour
Weight :	332 kg

Industrial oven 980 liters XL0980

Model	XL0980
Chamber volume:	980 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	980 litres
Interior Dimensions (L x P x H) :	1000 x 700 x 1400 mm
Exterior Dimensions (L x P x H) :	1481 x 1221 x 2062 mm

Partials product models shleves
Shelves quantity :	2 delivered / 24 maximum
Shelves dimensions :	970 x 670 mm
Max Load per Shelf / Total :	30 / 240 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 25A
Standard power 200 °C :	12000 Watts
Number of door(s) :	1
Ventilation flow rate :	2000 m3/hour
Weight :	410 kg

Industrial oven 1000 liters XL1000

Model	XL1000
Chamber volume:	1000 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	1000 litres
Interior Dimensions (L x P x H) :	1000 x 1000 x 1000 mm
Exterior Dimensions (L x P x H) :	1481 x 1536 x 1616 mm

Partials product models shleves
Shelves quantity :	2 delivered / 17 maximum
Shelves dimensions :	970 x 970 mm
Max Load per Shelf / Total :	30 / 240 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 25A
Standard power 200 °C :	12000 Watts
Number of door(s) :	1
Ventilation flow rate :	2000 m3/hour
Weight :	470 kg

Industrial oven 1400 liters XL1400

Model	XL1400
Chamber volume:	1400 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	1400 litres
Interior Dimensions (L x P x H) :	1000 x 1000 x 1400 mm
Exterior Dimensions (L x P x H) :	1481 x 1541 x 2064 mm

Partials product models shleves
Shelves quantity :	2 delivered / 24 maximum
Shelves dimensions :	970 x 970 mm
Max Load per Shelf / Total :	30 / 280 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 25A
Standard power 200 °C :	15000 Watts
Number of door(s) :	1
Ventilation flow rate :	2500 m3/hour
Weight :	638 kg

Industrial oven 1800 liters XL1800

Model	XL1800
Chamber volume:	1800 litres

Performances :
Standard maximum temperature :	200 °C
Optional maximum temperature :	300 °C

Dimensions :
Chamber volume:	1800 litres
Interior Dimensions (L x P x H) :	1000 x 1000 x 1800 mm
Exterior Dimensions (L x P x H) :	1481 x 1541 x 2464 mm

Partials product models shleves
Shelves quantity :	2 delivered / 30 maximum
Shelves dimensions :	970 x 970 mm
Max Load per Shelf / Total :	30 / 320 kg

Power & Divers :
Electrical Supply :	400V ~3P + N 32A
Standard power 200 °C :	18000 Watts
Number of door(s) :	1
Ventilation flow rate :	2500 m3/hour
Weight :	736 kg

Range XL		XL0112	XL0343	XL0490	XL0686	XL0980	XL1000	XL1400	XL1800

Performances
Temperature range :	Ambient temperature + 20 °C à 200 °C
Standard maximum temperature :	200 °C
Homogeneity at 105 °C :	± °C	< 1.2	< 1.2	< 1.2	< 1.2	< 1.2	< 1.2	< 1.2	< 1.2

Chamber dimensions
Chamber volume:	dm3	112	343	490	686	980	1000	1400	1800
Width :	mm	500	700	700	700	1000	1000	1000	1000
Depth :	mm	450	700	700	700	700	1000	1000	1000
Height :	mm	500	700	1000	1400	1400	1000	1400	1800

Exterior Dimensions
Exterior Chamber Volume :	m3	0.81	1.76	1.89	2.92	3.73	3.68	4.71	5.62
Width :	mm	751	961	961	1181	1481	1481	1481	1481
Depth :	mm	942	1192	1191	1221	1221	1536	1541	1541
Height :	mm	1152	1533	1653	2023	2062	1616	2064	2464

Shelves:
Delivered / Maximum :		2 / 8	2 / 11	2 / 17	2 / 24	2 / 24	2 / 17	2 / 24	2 / 30
Dimensions L / P :	mm	470 x 420	670 x 670	670 x 670	670 x 670	970 x 670	970 x 970	970 x 970	970 x 970
Maximum weight / Total :	kg	30 / 100	30 / 180	30 / 180	30 / 200	30 / 240	30 / 240	30 / 280	30 / 320

Other informations
Number of door(s) :		1	1	1	1	1	1	1	1
Window L / l (option)	mm	180x350	350x550	350x550	350x550	350 x 550	350x550	400x800	400x800
Weight :	kg	136	198	218	332	410	470	638	736

Electrical data
Standard power 200 °C :	Watts	3000	6000	6000	9000	12000	12000	15000	18000
Electrical Supply :	volts	230V ~1P 50Hz 16A	400V ~3P + N 50Hz 16A	400V ~3P + N 20A	400V ~3P + N 50 Hz 16A	400V ~3P + N 25A	400V ~3P + N 25A	400V ~3P + N 25A	400V ~3P + N 32A

Nous nous réservons le droit d'apporter toute modification technique sans préavis.

All the options of the range XL

Reference	Image	Description
OG9001		Temperature up to 300°C
OG9005		Fan speed controller The fan speed influences the interior homogeneity as well as the temperature rise time.
OG9006		Door with viewing window You will be able to see and control inside the oven. The surface temperature around the window and the power consumption will be higher. The temperature uniformity will be affected.
OG9008		Digital weekly program timer Set times of operation of the oven for each day of the week. Ventilation is stopped only when the oven temperature has fallen to 80°C to prevent damage to the fans.
OG9012		Fan and heating stop at door opening
OG9030		Factory calibration certificate 1 point 1 temperature Measurement in the center of the working chamber at 105°C, 150°C or 200°C (according to FD X 15-140).
OG9031		Homogeneity control 1 temperature (105,150 or 200°C) Measurement at 9 or 15 points in the working chamber at 105°C, 150°C or 200°C (according to FD X 15-140).
OG9034		Air cooling extractor Enables cooling the temperature in the working volume at the end of the cycle.
OG9038		Work chamber lighting
OG9045		Air outlet extractor Evacuates the exhaust air into a duct system.
OG9047		Access port diameter 60 mm Centered on the left side. Allows the passage of cables or sensors.
OG9049		Temperature profiler and recorder Creates up to 100 programs with 25 steps each. Recording of measured temperatures. Large graphical display. Real-time monitoring of temperatures. 3 extra channels. With USB and RJ45 plugs.
OG9051		Simple internal vacuum port G1/4 male feedthrough with external isolation valve
OG9071		Ethernet/RS485 converter Add an Ethernet port to communicate in modbus TCP with temperature controller
OG9072		C6000 profiler
OG9073		Ethernet RJ45 communication module Interface connected to the oven controller(C3030, C6000 or C6060). The user can control the controller with a web application included in the interface. It can also send data to a cloud.
OG9074		Tower 3 lights and buzzer Green: Cycle in progress <br> Yellow: Cycle finished <br> Red: Alarm <br> Buzzer: Alarm / Cycle finished<br>

All the accessories for the range XL

Reference	Image	Description
AG9001		Shelf with guide bars Made of chromed steel. Max distributed loading of 30 kg. With 2 anti-tilting guide bars.
AG9002		Reinforced shelf 60 kg with guide bars Made of chromed steel. Max distributed loading of 60 kg. With 2 anti-tilting guide bars.
AG9003		Recovery tray Made of stainless steel. Easy to clean. Their height of 20 mm collects liquids or other substances during your process.
AG9005		Subframe with feet Elevates the oven for a more comfortable loading. Adjustable feet in height.
AG9006		Subframe with castors Elevates the oven for a more comfortable loading. 4 castors, two with brakes.
AG9013		Data logger with 2 channels (software included) Saves the temperatures measured by 2 mobile sensors. Record temperatures measured by 2 mobile sensors. Box with magnetic fixing<br> Dimensions : 93.2 x 65.2 x 30.5 mm Weight: 115 g<br> Display : LCD screen 2 lines \| ABS IP54<br> Communication PC : 1 micro-USB Power supply by battery AA lithium 3.6V<br> Tc entries : female connector micro-USB, thermocouples (K, J, T, N, S)<br> Recording from every 1s to 24h Autonomy: 4 years (for 1 measure every 15 monutes) Software and cable included
AG9014		Portable paperless recorder with graphical screen 4 channels Color graphical display for real monitoring of temperature changes. With USB and RJ45 plugs, and 4 connectors for mobile sensors.
AG9015		Portable paperless graphic recorder with 6 channels Full color screen display. Real monitoring of temperature changes. With USB and RJ45 plugs, and 6 connectors for mobile sensors.
AG9016		Thermocouple probe Length 3 m, with plug
AG9042		Wifi communication module Module to connect to the oven temperature controler (C3030, C6000 or C6060). After configuring the module to access to a Wifi switch, the user can pilot the controler using a Web application included into the module. The module can also send data to a cloud. Adding a SD Card allows the module to keep an history by day and by curing number.